96-02 Viper Stanchion Panels Update: |
Update: All pre-sold Stanchions have been delivered and now all sales are open to the public.
Get your 96-02 Viper Stanchions now!! Sale - $450 shipped per pair |
Coming Soon:
|
93-98 Mark VIII rear window seal
|
92-02 Viper windshield cowl panel
|
Featured NEW Products and Services:
96-02 Dodge Viper Stanchion Panels/Seals -
The 96-02 Viper Stanchion Seals. These redesigned OEM reproduction seals/panels will fit exactly as factory replacements.
All Pre-sold orders have shipped and now all stanchions are open to the public. Get yours now!!
If you have any questions please contact us at [email protected].
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
1993.5-1996 Dodge Viper Large Hole Stanchion Close Out Panel
1993.5-1996 Dodge Viper Large Hole Stanchion Close Out Panel (5 Screw). This is a new aftermarket reproduction part ready to install. Please note this product will ship out in 1 - 2 weeks.
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
1993.5-1996 Dodge Viper Small Hole Stanchion Close Out Panel
1993.5-1996 Dodge Viper Small Hole Stanchion Close Out Panel (5 Screw). This is a new aftermarket reproduction part ready to install.
97-02 Viper RT/10 Stanchion Panels/Seals
97-02 Viper RT/10 Stanchion Panels/Seals
Redesigned OEM reproduction seals/panels fit exactly as factory replacements. We have eliminated the problems of the original panels to give you a superior part. $595 each
Left Hand & Right Hand
If you have any questions please contact us at [email protected].
1993.5-1996 Dodge Viper Stanchion Panel
1993.5-1996 Dodge Viper Stanchion Panel (5 screw). This is a new aftermarket reproduction part ready to install.
Drivers Side (left) and Passenger Side (right) are available for purchase.
97-02 Prowler Anode Radiator Cap
Our cap has a sacrificial anode that stops Electrolytic Metal Erosion (EME) inside the cooling system of your Prowler's V-6 engine. Automotive cooling systems, especially aluminum blocks that includes our Prowlers (and many other cars) carries a slight positive charge. This will cause erosion of the aluminum engine components that come in contact with the coolant. The sacrificial anode is immersed in the coolant tank and because it's a "softer" metal, the EME attacks it instead and extends the life of all metal components in the coolant system. The anode will be eroding out and saves your radiator and cooling system.
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
1997-2002 Prowler "Wonderbar" (for a smoother ride) Stabilizer Bar
A Wonder Bar is a direct bolt in replacement for the stock stabilizer bar that offers an amazing difference in your Prowler’s ride quality.
By utilizing a smaller diameter and hollow tube, the Wonder Bar allows your front wheels to operate more independently and smooth out your ride. The Wonder Bar has less tensional strength than the stock stabilizer bar and gives a noticeable difference in ride quality over rough road surfaces or when one wheel hits a pothole or bump.
Your Prowler’s effective spring rates are not compromised for straight line driving but are lessened while one wheel reacts independently of the other or during cornering or over bumps.
You will notice a very slight increase in body roll during hard cornering but will also notice a marked increase in front traction.
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
Prowler 1997-2002 A-Arm Ball Joint Cap--Redesigned
Prowler 1997-2002 Redesigned A-Arm Ball Joint Cap
Redesigned Prowler Kat Logo cap that covers your A-Arm ball knuckle. Our new caps are designed to be serviceable with a molded in magnet. They can be removed again and again without the worry of broken attachment clips. Sold in pairs but call if you just need one.
Fits all 4 locations on your Prowler.
Recently Purchased Products
New Viper Parts:
92-98 Viper Door Pull Pocket Trim Cup
92-98 Viper Door Pull Pocket Trim Cup
Reproduction Door Pull Pocket Trim Cup in softer plastic to prevent cracking. Fits both Left and Right.
92-98 Dodge Viper Pie Shaped Door Bezel Panel
92-98 Dodge Viper Pie Shaped Door Bezel Panel-LEFT & RIGHT
Our new reproduction Door Bezel Pie Shaped Panel is made with softer plastic to make it much more flexible and keep them from breaking like original panels.
92-02 Viper Clutch/Brake Pedal Pads
92-02 Viper Clutch/Brake Pedal Pads
Temple Performance has reproduced the pedal pads for the 92-02 Viper. Fits both Clutch and Brake
92-98 Viper Interior Door Handle Trim Bezel
92-98 Dodge Viper Interior Door Handle Trim Bezels--Left and Right
Temple Performance has reproduced these ordinal Door Handle Interior Trim Bezels but have redesigned them with softer plastic. This will ensure they don't break like the originals and can be reinstalled if you have to remove them.
1993.5-1996 Dodge Viper Stanchion Panel
1993.5-1996 Dodge Viper Stanchion Panel (5 screw). This is a new aftermarket reproduction part ready to install.
Drivers Side (left) and Passenger Side (right) are available for purchase.
Heater Box Intake Plenum Seal
Replace that old flattened and torn eye sore under your hood with our replacement Heater Box Intake Plenum Seal. Easy to install and give the new look again.
Dodge Viper soft-top repair and rebuild
ViperSoft Top repairs/rebuilds - We offer repairs to Gen 1 & 2 Soft Tops and specialize in frame repairs. Prices start at $175.00
92-95 Dodge Viper Trunk Spare Tire Panel
92-95 Dodge Viper Custom Trunk Panel enables the use of a full length carpet panel (Logo carpet panel not included). Our panel is a high strength flexible plastic covered with OEM trunk felt on both sides to protect the trunk and spare. Make your trunk a usable space and looks great too!
92-02 DODGE VIPER RT/10 REAR WINDOW SEAL
All new reproduction 92-02 Viper Rear Window Seal
Bulb type seal replaces the flat type seal and offers a better fit and a lifetime of service.
Priced at $179.00 shipped
96-02 DODGE VIPER TRUNK PANEL
96-02 Dodge Viper Trunk Panel replacement enables the use of a full length carpet panel (logo not included). Our panel is a high strength flexible plastic covered on both sides with OEM trunk felt to protect the trunk and spare. Make your trunk a usable space and looks great too!
On Sale
On Sale
92-02 Dodge Viper Clear Front Marker Lights
Temple Performance's new 92-02 Dodge ViperClear Front Marker Lights. Our new product offers LED lighting for great visibility. Our lights are also slightly recessed to give a much better appearance. They also plug directly into your existing harness and does not require any wiring changes.
Tesla Grilles:
On Sale
On Sale
Tesla Model 3 Grilles (10 Styles)
The Model 3 has unique curves. This was a tough grille to design, but designers got it right and the lines are perfect. Don't fall for the imitation grilles.
On Sale
On Sale
Tesla Model 3 & Y Grille S (8 Styles)
New Design - Tesla Model 3 & Y Grilles. All new custom designed "S" style to give it the true Tesla look and a much needed face to enhance the already stunning personality of the Model 3 & Model Y! Automark by General Formulations High Performance vinyl will give years of style.
All installation instructions included.
Tesla Model Y Grilles (10 styles)
New - Tesla Model Y Grilles. Give your Tesla a much needed update to enhance the already stunning personality of the Model Y! Choose from options A - J on the list of grilles. These Grilles will give years of updated style! Check out our newest "J" style in Carbon Fiber. All installation instructions are included!
The Model Y has unique curves. This was a tough grille to design, but designers got it right and the lines are perfect. Don't fall for the imitation grilles.
Mustang Parts:
2011-2014 Ford Mustang GT 1pc Aluminum Driveshaft
2011-2014 MUSTANG GT 1-Piece Aluminum Driveshaft
5.0L MOTOR STANDARD (500HP), (Auto or 5-Speed)
2005+ Mustang GT Front Splitter
This front splitter is one of the nicest available to accent the front of the 2005+ Mustang GT, and it fits like a glove, using stainless steel bolts and hardware from the underside for a secure, long lasting install. Molded from thick fiberglass in matteblack it can be installed as is, or can be painted to match after surface prep if desired. The piece clears most curbs and bumps even on lowered Mustangs, and helps direct airflow better over the front of the car, while filling in the gap under the front radiator inlet.
We've actually seen an improvement in fuel mileage on the highway in our own tests, but your results may vary. Comes with instructions and installation re-uses 6 existing holes on the bottom of the bumper cover, and six additional 1/4" holes will need to be drilled to complete the installation. Weight shown is for shipping purposes, actual weight of part is 8 lbs.
Legend Mustang Custom Seats
Custom Sculptured Seats for your Mustang for only $1,600.00 for the pair!
Note: Price is with Customer Supplied Cores
05-09 Legend Mustang Fiberglass Hood with Scoop
Sold out
05-09 Legend Mustang Fiberglass Hood with Scoop
Scoop is similar to a 1967 Shelby GT500. Its closed, but can be trimmed open. This hood attaches using all the factory hardware at the stock attaching points. It has a nice gel coat & fully finished underside require minimal prep to paint. The windshield washer nozzle jet holes are not pre-drilled.
*Please TEST FIT before any prep or painting!
This is considered oversize and shipping will be determined by where it is going. Not free on the item.
05-09 Legend Mustang GT Front Chin Spoiler
FRONT CHIN SPOILER 05/09 MUSTANG GT (LEGEND) Legend Mustang Front Chin Spoiler for 2005-2009 Mustang GT.
This composite spoiler mounts directly to the bottom of your stock bumper cover. It comes finished a nice black textured finish which you could paint if you had to for some reason. Instructions are included, but you'll need to supply your own hardware.
*As always, please TEST FIT before any prep or painting!
This is considered oversize and shipping will be determined by where it is going. Not free on the item.
05-09 Legend Mustang Fiberglass Deck Spoiler
Sold out
Legend Mustang Fiberglass Deck Spoiler for 2005-2009 Mustang.
This one-piece spoiler bolts directly to the car using the original bolt holes! (Yes, you will need to drill holes in the trunk lid if your car didn't have a rear spoiler originally.)
*Like all fiberglass, this part will require additional preparation for proper fit & finish. As always, please TEST FIT before any prep or painting!
This is considered oversize and shipping will be determined by where it is going. Not free on the item.
05-09 Legend Mustang Fiberglass Side Window Scoops Pair
Legend Mustang Fiberglass Side Window Scoops, Pair for 2005-2009 Mustang.
These closed scoops are super cool & easy to install. Legend recommends clear windshield urethane because it allows adjustment before it sets. Instructions included.
Like all fiberglass, additional prep may be needed for proper fit & finish. AS ALWAYS, please TEST FIT before any painting or preparation!
This is considered oversize and shipping will be determined by where it is going. Not free on the item.
05-09 Legend Mustang Fiberglass Quarter Panel Scoops Pair
Legend Mustang Fiberglass Quarter Panel Scoops, Pair for 2005-2009 Mustang.
These closed scoops are easily installed. Legend recommends the use of clear windshield urethane for installation as it allows for some adjustment before it sets up. Has a nice white gel coat that needs only minimal preparation to paint.
As always though, please TEST FIT before any prep or painting!
This is considered oversize and shipping will be determined by where it is going. Not free on the item.
2005 Legend X Mustang
2005 Legend X Mustang by Temple Performance Cars. This is S/N 001 and was the test mule and show car for the company. It started life as a Series 1 Legend Mustang and evolved into the 700HP Legend X.
Options include:
- 5.0 stroked 3 valve with ported and polished heads
- Kenne 2.6 Intercooled Supercharger
- 6 spd Tremec T-56
- Sped dual disc clutch
- 4 point roll bar
- 8.8 Detroit locker rear end with 4:10 gears
- Fully bolstered seats, Brembo brakes
- Fully boxed frame, Full Legend Body Package.
Featured in numerous magazines and even a few covers. Own the first one built with only 13,259 miles.
$85,000 OBO
Contact John Temple for additional information.
(770)722-2587
2005-up Ford Mustang 1pc Aluminum Driveshaft
STANDARD (500HP), (Auto or 5-Speed) 2005-up Ford Mustang 1pc Aluminum
Mark VIII Parts:
97-98 MARK VIII WHITE FACE GAUGE PACKAGE (2 styles)
Temple Performance introduces our exclusive white face gauge package for the 97-98 Lincoln Mark VIII. Available for automatic and manual transmission cars. The manual version eliminate the P-L located between the speedometer and the tach. Our white face package is a full replacement for the factory cluster face and is a easy to do...simply peel away the factory face and install the new face in its place. Give your Mark VIII a great new look!
93-96 Terminator Mark VIII Bumper Cover
93-96 Terminator Mark 8 Bumper Cover Temple Performance Cars is proud to introduce our all new Terminator Bumper Cover for the 93-96 Lincoln Mark VIII. Give your Mark VIII the super aggressive look that they always lacked! The bumper cover uses 03-04 Cobra fog lamps and bezels and all attachment points remain in their original locations.Available Now!
Since we use Truck Freight for this product, shipping cannot be figured until we have an address. We will let you know what the shipping cost will be once you place your order or you can contact us at (770)722-2587 or [email protected] and we can provide a shipping quote.
NOTE: All Terminator Bumper sales are final and no returns or refunds offered. This is due to the fact that it is a custom build part and built per order.
97-98 Lincoln Mark VIII Terminator Bumper Cover
Temple Performance Cars is proud to introduce our all new Terminator Bumper Cover for the 97-98 Lincoln Mark VIII. Give your Mark VIII the super aggressive look that they always lacked! The bumper cover uses 03-04 Cobra fog lamps and bezels and all attachment points remain in their original locations.Available Now!
Since we use Truck Freight for this product, shipping cannot be figured until we have an address. We will let you know what the shipping cost will be once you place your order or you can contact us at (770)722-2587 or [email protected] and we can provide a shipping quote.
NOTE: All Terminator Bumper sales are final and no returns or refunds offered. This is due to the fact that it is a custom build part and built per order.
SCT TUNERS FOR 1996-98 LINCOLN MARK VIII
SCT TUNERS FOR 1996-98 LINCOLN MARK VIII WITH CUSTOM TUNE.
SCTX4 Power Flash Ford Programmer Preloaded Tuner:
Proven SCT Technology & DYNO proven Strategy Tune makes all the difference. This is the best mod you can make, even on a stock or mild bolt-on Mark VIII. Simple plug and play installation. Provides preloaded tunes, improve performance, mileage & more, reads/clears DTC Trouble Codes, Enhanced data logging and display.
93-98 Mark VIII Chassis Strengthening Package
Full length sub frame connectors that provide chassis strengthening from the front radiator support to the independent rear suspension with removable front section for engine and K member maintenance.
Also included is a rear strut tower brace designed to stop strut tower flex.
Made from heavy gage cold rolled steel this package will provide superior handling and give your Mark VIII a whole new driving experience. Price is installed and includes all parts and labor. Call us for a quote on sub frame ( and shipping if needed)only.
Temple Performance Cars Mark VIII Intake Emblem
Temple Performance Cars Intake Emblem specially designedwith the Lincoln emblem to fit Lincoln Mark VIII's with the 96-98 Cobra Intakeconversion.
Easy to apply emblems with super adhesive backing andmade from materials designed for outdoor use. Get yours today and bring theStar back to your Engine!"
Lincoln Mark VIII Rear Window Trim Repair Kit
Lincoln Rear window trim repair kits. Repairs the wavy lasagna rear window trim and gives your Mark the clean look again.Our repair kit installs under your existing trim. **This product does not replace your existing trim but only repairs it and is NOT an OEM seal replacement**
Custom Performance Lincoln Steering wheels
Custom Performance Lincoln Steering wheels. Race inspired steering wheel in both European style or standard racing ergonomics. Tube diameter is increased from 3.5 to 4 inches for improved grip and handling.
Priced at $499.99 when yousend your existing wheel.
97-98 Mark VIII Console Spring
Replace that broken or weak console spring on your 97-98 Mark VIII with our redesigned and stronger spring. Easy to install and will provide you with years of trouble free use!
93-96 Lincoln Mark VIII White Face Gauge Package
Temple Performance introduces our exclusive white face gauge package for the 93-96 Lincoln Mark VIII. Our white face package is a full replacement for the factory cluster faces and is easy to do...simply peel away each of the three factory faces and install the new faces in their place. Give you Mark VIII that great new look!!
Mark VIII 4" Driveshaft
Temple Performance Cars and Coast Driveline and Gear have teamed up to introduce our new high performance Mark VIII driveshaft. This 4" one piece aluminum driveshaft is designed to support up to 600+ HP. Affordably priced and exclusively sold through Temple Performance Cars.
Specifications are listed below:
- 6061-T6 Alcoa Aluminum
- 120 wall thickness
- Balanced to under 1/8 oz
- Less than 5 thous. deflection
- Dana Spicer Computer Balance
- Dana Spicer Parts
- 3 Computer welded passes per weld
- Balanced with stainless weights
- 1330 "U" Joints